Zte H1600 Maintenance Management Manual page 52

ZTE H1600 Maintenance Management Guide
Steps
1. On the main page of the ZTE H1600, select Internet > SNTP to open the SNTP
page, see
Figure 4-24 SNTP Configuration Page
2. Configure the SNTP parameters.
Table 4-16
Table 4-16 Parameter Descriptions for the SNTP
Parameter
Time Zone
NTP Server1-NTP Server5
Poll Interval
Automatically Adjust Clock For Day-
light
DSCP
3. Click Apply button to apply the changes.
44
Figure 4-24.
lists the SNTP parameters.
Description
Time zone.
IP address of the primary/secondary/third/fourth/fifth NTP
server.
Interval of time synchronization.The value range is
3600-86400, the unit is second.
Enable or disable the automatically adjust clock for daylight
function.
To ensure the QoS of communication,
ed Services Code Point) encodes the 8 flag bytes in the IP
header of data packets to classify service types and distin-
guish service priorities.The value range of DSCP is 0-63
and each DSCP code value is mapped to a defined PHB
(Per-Hop-Behavior) code.
SJ-20210621164956-008 | 2022-09-01(R1.3)
DSCP (Differentiat-