Detaching And Refitting The Drum Separation Claws - Olivetti d-Copia 3001MF Service Manual

Hide thumbs Also See for d-Copia 3001MF:

Table of Contents

(3) Detaching and refitting the drum separation claws

Follow the procedure below to replace the drum separation claws.

1. Remove the drum unit (see page 1-5-34).

2. Remove two screws and remove the lower

cleaning seal.

3. Release the inserted parts and remove the

drum separation claws.

4. Replace the drum separation claws and

Install the claws.

5. Refit all the removed parts.

separation claw

Lower cleaning seal

Service Manual

cleaning seal

Figure 1-5-63

Drum separation claw

Inserted part

Figure 1-5-64

cleaning seal