Table of Contents
Advertisement
2K5
Maintenance
item No.
Adjusting the DP input light luminosity
U074
Description
Sets the luminosity correction for scanning originals from the DP.
Purpose
Modify the setting only if a spotted background appears when a bluish original is scanned from the DP.
Setting
1. Press the start key.
2. Change the setting using the +/- or numeric keys.
Display
INPUT DATA
Settings 0: No correction / 1: Slight correction / 2: Medium correction / 3: Strong correction
3. Press the start key. The value is set.
Supplement
While this maintenance item is being executed, copying from an original is available in interrupt copying mode
(which is activated by pressing the system menu key).
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Setting the economy mode
U080
Description
Sets the level in the economy mode.
Purpose
To increase or decrease the image density in the eco-print mode.
Setting
1. Press the start key.
2. Change the setting value using the +/- or numeric keys.
Display
ECO MODE
Increasing the setting makes the image darker; decreasing it makes the image lighter.
3. Press the start key. The value is set.
Supplement
While this maintenance item is being executed, copying from an original is available in interrupt copying mode
(which is activated by pressing the system menu key).
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-38
Description
Description
DP input light luminosity correction
Description
Exposure is toner economy mode
Service Manual
Setting range
Initial setting
0 to 3
0
Setting range
Initial setting
0 to 100
60
Y112040-6
Advertisement
Table of Contents
