2K5
9. Unhook the hook and remove the inner
cover lid.
10. Remove three connectors.
11. Pull the developing lever.
12. Remove the screw and remove the drum
unit.
13. Replace the drum unit and install the unit.
14. When the drum unit is replaced with a new
one, carry out the following procedure.
15. Perform maintenance mode U410 (Adjust-
ing the halftone automatically)
(see page 1-3-75).
1-5-32
Hook
Inner cover lid
Inner cover lid
Developing lever
Screw
Drum unit
Service Manual
Connectors
Figure 1-5-59
Figure 1-5-60
Y112040-6