Table of Contents
Advertisement
Maintenance
item No.
Setting the automatic toner install
U931
Description
Sets automatic toner installation on or off when power is turned on.
Purpose
Changed to off when deactivating automatic toner installation.
Setting
1. Press the start key.
2. Select ON or OFF.
Display
ON
OFF
Initial setting: OFF
3. Press the start key. The setting is set.
4. The machine automatically returns to the same status as when the power is turned on.
Relay board maintenance
U935
Description
Sets the mode when call for service (C0060) occurs.
Purpose
Sets the machine status temporarily when call for service (C0060) occurs. However, after the setting, call for
service (C0060) occurs again when progress of period.
Setting
1. Press the start key.
2. Select the item.
Display
MODE0
MODE1
Initial setting: MODE0
3. Press the start key. The setting is set.
4. Turn the main power switch off and on.
Supplement
After removing the cause of the problem, be sure to change the setting in OFF.
Y112040-6
Description
Description
Automatic toner install function ON
Automatic toner install function OFF
Description
Setting mode: OFF
Setting mode: ON (Usable up to three times of use)
Service Manual
2K5
1-3-91
Advertisement
Table of Contents
