Olivetti d-Copia 3001MF Service Manual page 212

9. Remove the connector of the inverter PWB.
10. Release the clamp and remove the wire.
11. Pull the connector out from the opening on
the rear of the scanner unit.
12. Remove two films.
13. Remove the wire guide lid.
14. Move the mirror 1 frame to notch position.
Y112040-6
Inverter PWB
Opening
Film
Notch position
Service Manual
Connector
Clamp
Clamp
Figure 1-5-31
Film
Notch position
Mirror 1 frame
Wire guide lid
Figure 1-5-32
2K5
1-5-17