Table of Contents
Advertisement
Maintenance
item No.
Setting the enterprise mode
U510
Description
Sets whether or not the application function is enabled.
Purpose
According to user request, changes the setting.
Setting
1. Press the start key.
2. Select [MODE1].
3. Select the item.
Display
ON
OFF
INSTALL
UNINSTALL
Initial setting: ON (Inch specifications)/OFF (Metric specifications)
4. Press the start key. The setting is set.
Method: [INSTALL]
1. Insert the USB memory that contains the application into the USB memory slot on the machine.
2. Turn the main power switch on.
3. Enter the maintenance item.
4. Press the start key.
5. Select [INSTALL].
6. Press the start key. Installation of application is started.
7. When normally completed, [Complete] is displayed.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Y112040-6
Description
Description
Application function is enabled
Application function is disabled
Executing the install
Executing the uninstall
Service Manual
2K5
1-3-83
Advertisement
Table of Contents
