Canon 1100 Reference Manual page 107

NOTE
•
If the message is displayed during a Copy job, you have to press
resume copying.
•
If you want to select another paper feeding location that is loaded with paper, press [Done], then
press (Start) to resume copying.
•
To load paper of 64 to 79 g/m
location for thin paper. (See p. 2-18)
•
To use a drawer with transparencies, you have to first designate that drawer as the feeding location
for transparencies. (See p. 2-16)
•
Refer to Chapter 2, 'Useful Copy Functions', in the Copying Guide for instructions on the correct way
to load transparencies into a drawer.
•
Refer to 'Loading Paper into the Paper Deck', on p. 5-29 for instructions on the correct way to load
paper into the paper deck (option).
1
Press and then release the button of the drawer that you want to load paper
into.
Gently press the button all the way to the back. If you do not press the button all the way, you will not be
able to pull the drawer out. In this case, push the drawer back in and press the button again.
2
Grip the handle and pull the drawer out until it stops.
2
in weight, you have to first designate the drawer as the feeding
(Start) after loading paper to
Loading Paper
3
3-3