Displaying Copy Counts by Department
You can display the total paper count by department.
NOTE
•
If a system settings password is set, you will need to first enter that password before being able to
access department-related functions.
1
Display the required screen as follows:
(Additional Functions) → [Custom Settings] → [
Press
If a system settings password is set, enter the password after pressing [Dept. ID. Management]; then
press [OK].
2
Select [On]; then press [Copy Totals].
3
Check the copy count; then press [OK] → [OK].
NOTE
•
Press [Clear All Totals] to reset all copy counts to zero.
4
Press [Done].
] → [Dept. ID. Management]
] or [
Customising the Copier's Global Settings
2
2-31