1
Display the required screen as follows:
(Additional Functions) → [Custom Settings] → [
Press
2
Select the desired drawer to designate as the feeding location for
transparencies; then press [OK].
IMPORTANT
•
Loading a drawer designated as the feeding location for transparencies with plain paper will lead to
paper jams. To use such a drawer with plain paper, cancel the drawer's designation as the feeding
location for transparencies.
NOTE
•
Only A4 and A4R drawers can be designated as the feeding locations for transparencies.
•
Drawers that are already designated for use with transparencies are highlighted.
•
To cancel the feeding location setting for transparencies, select the highlighted drawer again. The
highlight and the transparency icon disappear, indicating that the setting is cancelled.
•
Drawers designated as the feeding location for transparencies cannot be turned on for Drawer
Eligibility for APS/ADS.
3
Press [Done].
] → [Transparency Feed Location]
] or [
Customising the Copier's Global Settings
2
2-17