Specifying Network Settings From The Touch Panel Display - Canon imageRUNNER ADVANCE C5051 Getting Started

Specifying Network Settings from the Touch Panel Display

To specify the network settings for the machine, press
administrator using the touch panel display. (See "Logging In to the Machine as an Administrator, " on p. 1-17.)
You can specify the network settings in [Network] in [Preferences], according to the type of network environment you are
using. The following screen shots show the flow of operations for specifying the network settings. See this diagram to specify
the various network settings, in accordance with the procedures in Chapters 4 to 7.
Settings/Registration screen
Preferences screen
To move up one level, press [Up].
Settings specified from the control panel become effective after the machine is restarted, after the procedure. Turn OFF the machine, wait
at least 10 seconds, and then turn it ON. (See Chapter 1, "Before You Start Using This Machine. " )
For instructions on how to turn ON/OFF the machine, See Chapter 1, "Before You Start Using This Machine. "
Network screen
(Settings/Registration) on the control panel → log in as the
TCP/IP Settings screen

Specifying Network Settings from the Touch Panel Display

3
3-5