3
Select the group that the function belongs to.
2
NOTE
•
If the group that the function belongs to is not displayed, press [
group.
•
If there is already a function assigned to the selected standard key, the key of that function is
highlighted.
•
If you want to cancel the assigned function, press [No Settings].
4
Select the function that you want to assign to the standard key; then press
[OK].
Only one function can be assigned to each standard key.
To cancel assigning functions, press [Cancel].
To continue assigning functions to any other standard keys, repeat steps 2 through 4.
NOTE
•
If the function that you want to assign to the standard key is not displayed, press [
display the desired function.
2-8
Customising the Copier's Global Settings
] or [
] to display the desired
] or [
] to