Adding Toner
When the toner has run out and copies can no longer be made, the message shown below
appears on the touch panel display. The message explains how to add toner.
3
WARNING
•
Do not throw toner bottles into open flames, as this may cause the toner to ignite and result in
burns or a fire.
•
Do not store toner bottles in places exposed to open flames, as this may cause the toner to
ignite and result in burns or a fire.
CAUTION
•
Keep toner out of the reach of small children. If toner is ingested, consult a physician
immediately.
•
If toner gets onto your hands or clothes, wash it off immediately with cold water. Do not use
warm water as this may fix the toner permanently and you may not be able to remove it later.
IMPORTANT
•
Copying cannot resume until the depleted toner is refilled. It is recommended that you prepare toner
before it runs out.
•
Use only the toner recommended for use with this copier.
•
Never add more than one toner bottle at one time.
•
Add toner soon after the "Add xxx toner". message is displayed.
NOTE
•
Press [Previous] or [Next] on the screen for instructions on the procedure to add toner.
•
If the message appears during a Copy job, you have to press
resume copying.
3-12
Adding Toner
(Start) after refilling the toner to