Limitations of the Stapler Sorter
By making copies pass through the buffer pass unit, the stapler sorter prevents paper curl, which
hampers sorting and stapling. However, depending on the copy exposure setting, the following
situations can occur.
Sorting or Staple-sorting Stops
When making two-sided copies using the stack bypass, sorting may stop if the copies have
markedly different copy exposures on each side of the paper. Also, the sorting of A4R-size
copies may stop depending on the copy exposure. When this happens, the following message is
displayed.
Copying will automatically resume after you remove the copies from the bins.
NOTE
•
If the number of output sheets exceeds the stapling capacity, the copies will be sorted but not
stapled. In this case, manual stapling is also disabled.
•
The screen that appears differs depending on the options attached.
5-45
Stapler Sorter-F2
5