Entering in Inches
To enter values in inches for all functions that require numeric entry, set the Inch Entry setting to
"On" under Custom Settings of the Additional Functions screen. (See 'Specifying Inch Entry', on
p. 2-11.)
The following example (1_1/2") shows inch entry when specifying the Zoom Programme
function.
1
1
To enter 1
the touch panel display.
The entered values are displayed as shown above.
NOTE
•
Press [C] to cancel an incorrectly entered value.
•
You can enter only 2, 4, 8, or 16 as the denominator.
•
The value entered in inches is converted to mm by the copier each time it is entered. Thus, there may
be a slight difference between the value calculated and the actual value entered.
•
To enter values in mm, press [mm].
1-26
Entering Characters from the Touch Panel Display
1
/
inches, press [1], [_], [1], [/], and [2] using the number keys on
2