Chapter 3 Saving The Tones You Have Created; Storing Patches (Patch Write); Copying Patches (Patch Copy) - Boss GT-PRO Owner's Manual

Chapter 3 Saving the Tones You Have Created

Storing Patches (Patch Write)

When you want to keep a tone created with the Quick
Settings or a tone with altered parameter values, use the
"Write procedure" to save it to a User patch.
fig.03-0010
1. Press [WRITE].
The screen for specifying the save-destination User patch
appears in the display.
fig.03-0020d
Destination user Patch
2. Rotate the PATCH/VALUE dial to select the save-
destination User patch.
* This step is unnecessary if the current User patch is
acceptable.
* To cancel the Write procedure, press [EXIT]. The Play screen
returns to the display.
* You can also use the procedure described in "How to Switch
Patches (Patch Change)" (p. 19) to select the save destination.
3. Press [WRITE].
The GT-PRO switches to the write-destination patch, and
you're returned to the Play screen.
* The sound of the patch previously stored at the write
destination will be lost once the write is executed.
24
2
1,3

Copying Patches (Patch Copy)

You can copy a Preset or User patch to another User patch.
fig.03-0030
1. Select the copy-source patch.
Refer to "How to Switch Patches (Patch Change)" (p. 19).
2. Press [WRITE].
The screen for specifying the copy-destination patch
number appears in the display.
fig.03-0040d
Destination User Patch
3. Rotate the PATCH/VALUE dial to select the copy-
destination User patch.
* To cancel the copy, press [EXIT]. The Play screen returns to
the display.
* You can also use the procedure described in "How to Switch
Patches (Patch Change)" (p. 19) to select the copy destination.
4. Press [WRITE].
The GT-PRO switches to the copy-destination patch, and
you're returned to the Play screen.
* The sound of the patch previously stored at the copy
destination will be lost once the copy is executed.
3
2,4