Table of Contents
Advertisement
During a Call
Note: Some of these functions are system dependent. The parameters are set up in the
Portable Device Manager (PDM), see Mitel 5604 Wireless Handset Configuration
Manual, and Portable Device Manager (PDM) Installation and Operation Manual.
If configured in the PDM/WSM, it is possible to call an emergency call while the handset/keypad
is locked. During the ongoing emergency call, the soft key "More" and the soft key "R" are
disabled.
Adjust the Volume during a Call
Press the "Volume up" button to increase the volume, and the "Volume down" button to decrease
the volume. The handset will now store and keep the new volume level. It is also possible to
use the navigation key,
Open Contacts during the Call
1. Press the soft key "More" during the call.
2. Select "Contacts".
3. Press "Select".
4. Select "Call contact" for searching a local or company phonebook contact, or select "Central
phonebook" for searching a central phonebook contact.
5. Press "Select".
6. Select or search contact.
Note: It is possible to call the selected contact by pressing "Call". When calling the
contact, the first call will be put on hold. See also Start a New Call during Conversation
on page 20.
Turn the Microphone on/off during a Call
1. Press the soft key "More" during the call.
2. Select "Microphone off".
3. Press "Select".
The icon
indicates a silenced microphone. This means that the other part in an ongoing
call cannot hear you. To turn the microphone back on, do as follows:
1. Press the soft key "More" during the call.
2. Select "Microphone on".
3. Press "Select".
It also possible to turn the microphone off/on by a long press on
and
to adjust the volume.
5604 Wireless Handset User Guide
.
19
Advertisement
Table of Contents
