Table of Contents
Advertisement
Messaging
Receive a Text Message
When a text message is received, the LED flashes and the message alert signal sounds. If a
message is received during a call, a beep notifies the user and the message is stored in the
message list. The "New message" icon is shown in the display. The icon remains in the display
until all new messages are opened.
Read a Stored Text Message
1. In the Message menu, select Inbox and press YES.
2. Use the Down navigation key to find the message, and then press YES to view the message.
Write and Send a Text message
1. In the Message menu, select Send and press YES.
2. Select New and press YES.
3. Type the message. Keys 0-9,
characters, see "Enter Text and Numbers" on page 9 for more information.
Note: Some characters require more storage room and may cause the message to truncate
before the 160 character maximum.
The first character entered will be an uppercase character followed by lowercase characters
unless the
-key is pressed before entering the character. When pressing a key, the first
available character on that specific key is displayed (see "Enter Text and Numbers" on page 9).
To type any of the other characters on that key, press the key until that character appears in
the display. For example, to type the letter "E", press key "3" twice. "E" appears in the display
and is selected after a timeout or when another key is pressed.
4. Press YES and then enter the number to call.
5. Press YES to send the message.
Delete a Text Message
1. In the Message tab, select Inbox and press YES.
2. Select the message to delete.
3. Scroll with the Down navigation key to Remove and then press YES. The message is
deleted.
Reply to a Text Message
1. In the Message tab, select Inbox and press YES.
2. Select the message to which you want to reply.
3. Scroll with the Down navigation key to Reply and then press YES.
4. Write the reply and then press YES to send.
or # can be used. The "0" and "1" keys contain special
Messaging
21
Advertisement
Table of Contents
