Call A Number Included In A Message; Save Number; Write And Send A Message - Mitel 5604 User Manual

Call a Number Included in a Message

If the sender has written a number in the message it is possible to call the number without
dialling it.
1. Select "View".
2. Select "More".
3. Select "Call no. in text"
4. Select number in the list.
5. Press "Call".

Save Number

1. Enter "Messaging" in the menu, see Messaging on page 27.
2. Select "Inbox".
3. Select message .
4. Select "View".
5. Press "More".
6. Select "Save number".
7. Select "Work number", "Mobile number", or "Other number".
8. Add name and press "OK".
9. Press "Save". The number will be saved in the contact list.

Write and Send a Message

1. Enter "Messaging" menu, see Messaging on page 27.
2. Select "Write new message".
3. Write the message. Keys 0-9, * or # can be used. Key 0 and 1 contains special characters,
see Alphanumeric Keys on page 12 to see all characters.
The maximum message length is 160 characters.
Note: Some characters require 2 bytes in the final message, therefore the user will
sometimes not be able to enter 160 characters.
The first character entered will be an upper level character followed by lower level characters
unless the * -key is pressed before entering the character.
When pressing a key, the first available character on that specific key is displayed, see
Alphanumeric Keys on page 12. To get any of the other characters on that key, press the key
until that character appears in the display.
1. This option is only visible if the number consists of minimum 3 digits.
1
.
5604 Wireless Handset User Guide
29