Apply Limit - Kyocera TASKalfa 2552ci Operation Manual

Hide thumbs Also See for TASKalfa 2552ci:

Table of Contents

User Authentication and Accounting (User Login, Job Accounting) > Apply Limit

Apply Limit

This specifies how the machine behaves when the counter has reached the limit of restriction. The table below

describes the action taken.

Subsequently

*1 The next job will be prohibited in sending or in storing in the box.

Job stops when the counter reaches its limit.

Printing/scanning of the job continues but the subsequent job will

be rejected.

Job continues while displaying an alert message.

Display the screen.

[System Menu/Counter] key > [User Login/Job Accounting] > "Job Accounting

Settings" [Next]

If the login user name entry screen appears during operations, enter a login user name

and password, and select [Login]. For this, you need to login with administrator

The factory default login user name and login password are set as shown below.

Select "Apply Limit" [Change].

Configure the settings.

Select [Immediately], [Subsequently], or [Alert Only] > [OK]

Descriptions