How To Remove: Shelf Supports; How To Use: Steam Cleaning - Electrolux SteamBoost 800 Series User Manual

11.2 How to remove: Shelf supports

Remove the shelf supports to clean the oven.
Step 1 Turn off the oven and wait until it is cold.
Step 2 Carefully pull the shelf supports
up and out of the front catch.
Step 3 Pull the front end of the shelf
support away from the side
wall.
Step 4 Pull the supports out of the rear
catch.
Install the shelf supports in the opposite sequence.

11.3 How to use: Steam Cleaning

Turn off the oven and wait
until it is cold.
Step 1 Fill the water drawer to the maximum level until the signal sounds or the display
shows the message.
Step 2 Select: Menu / Cleaning.
Function
Steam Cleaning
Steam Cleaning Plus
Step 3
Press
The signal sounds when the cleaning ends.
Step 4 Press any symbol to turn off the signal.
When this function works, the lamp is off.
Before you start:
Remove all accessories and re‐
movable shelf supports.
Description
Light cleaning
Normal cleaning
Spray the cavity with a detergent.
. Follow the instruction on the display.
CARE AND CLEANING
1
3
2
Clean the bottom of the cavity
and the inner door glass with a
soft cloth with warm water and
a mild detergent.
Duration
30 min
75 min
163/576