4. Abbreviation
- RTL: Retention Time Limited
- NR: Non Repairable Board Ass'y
- MGF CHIP: Metal Glaze Film Chip
- C CHIP: Ceramic Chip
- COMPLX CMP: Complex Component
- W FLMPRF: Wirewound Flameproof
- C.B.A.: Circuit Board Assembly
- P.C.B.: Printed Circuit Board
- E.S.D.: Electrostatically Sensitive Devices
5. SERVICE OF CHIP PARTS
When servicing chip parts, please use a soldering iron of less
than 30 watts. Refer to "IC, TRANSISTOR AND CHIP PART
INFORMATION" page.
6. The parts with "
be substituted for a 0 ohm resistor.
7. C.B.A. replacement note:
Following C.B.A.s are supplied as a Unit(C.B.A.) only. Please note
that individual parts on C.B.A. are NOT supplied.
- E3 Main Power C.B.A.
- E4 Line Filter C.B.A.
- E7 System Power C.B.A.
13.2. MECHANICAL REPLACEMENT PARTS LIST
<The complete Exploded Views are shown in this manual>
PDF created with pdfFactory Pro trial version
This indicates that the retention time is limited for this item.
After the discontinuation of this item in production, it will no
longer be available.
" are 0 ohm resistor. When replacing, a wire can
82
www.pdffactory.com