MENU" button to release from"Video/Rgb Adjust" mode.
(Adjustment data is memorized in EEPROM IC(IC6009, IC6010) by
pressing" MENU" button.) Otherwise, adjustment data 5.4.13.
through 5.4.16. will be cancelled.
5.4.1. LCD COMMON ADJUSTMENT
Purpose:
To set the optimum LCD common voltage.
Symptom of Misadjustment:
The picture will be bluish or reddish.
Note:
This adjustment should be done in a darkroom.
1. Supply 70% Red Horizontal Signal and project on the screen.
2. Press
3. Press
becomes minimal.
4. Supply 70% Green Horizontal Signal and project on the screen.
5. Press
6. Press
becomes minimal.
7. Supply 70% Blue Horizontal Signal and project on the screen.
8. Press
9. Press
becomes minimal.
PDF created with pdfFactory Pro trial version
or
button on remote control to select"VCOM R".
or
button so that the flicker on the whole screen
or
button on remote control to select"VCOM G".
or
button so that the flicker on the whole screen
or
button remote control to select"VCOM B".
or
button so that the flicker on the whole screen
www.pdffactory.com
45