Table of Contents
Advertisement
System Configuration Example
Example of connection to a Personal computer
Diagram numbers correspond with numbers (see page 43.)
Personal Computer
2 (VGA MAC Adaptor)
Note
• The RGB input accepts signals from VGA, SVGA, XGA, SXGA (Compression), UXGA (Compression), and Macintosh
compatible computers without the need for any additional hardware.
• Plug the VGA signal cable (supplied) correctly into the RGB1 IN terminal or RGB2/YP
Projector and the RGB signal Output terminal on your computer. Secure the plugs by tightening the thumb screws.
When connecting the LCD Projector to a Macintosh Series computer, first connect the VGA MAC Adaptor (supplied)
to the RGB signal Output terminal on your computer. Secure the plugs by tightening the thumb screws. Be sure to set
the DIP switch on the VGA MAC adapter to your display type. (See page 43.)
• When the LCD Projector is connected to personal computer, you can use the remote control in place of the personal
computer's mouse by attaching the Mouse cable.
• If you wish to use the wireless mouse function, turn on the main power of the Projector before turning on the personal
computer.
• When connecting the LCD Projector to a compatible computer other than a VGA, SVGA, XGA, SXGA (Compression),
UXGA (Compression), or Macintosh series, a separate cable is needed.
• The wireless mouse feature may not be operable when using a personal computer with the Resume (last memory)
feature and the feature is not reset.
• If you wish to use the plug & play function, turn on the MAIN power switch on the LCD Projector before turning on the
personal computer.
• There is only one audio system circuit provided for the AUDIO IN terminals for RGB1, RGB2 and YP
Because of this, if using both RGB signals and YP
1 (VGA Cable)
3 (PS/2 Mouse Cable) or
4 (MAC Mouse Cable)
1 (VGA Cable)
PC Audio Cable (not included)
P
signals, it will be necessary to change over the connectors.
B
R
Audio system
5 (Audio Cable)
Connector jacks on
left side of Projector
P
IN terminal on the LCD
B
R
P
signals.
B
R
41
Advertisement
Table of Contents
