Table of Contents
Advertisement
3. Insert a (-) screwdriver into Portion (d) and move the Full Mirror
Blue in the direction shown by the arrows so that color
uniformity is achieved over the whole screen. And then tighten 2
screws (D).
Note:
Do not use excessive force when adjusting the
Mirror. Otherwise, the Mirror may be damaged.
5.4.11. DUCT FAN SPEED ADJUSTMENT
Purpose:
To set the optimum turn speed of the Duct Fan.
Symptom of Misadjustment:
Temperature of the LCD projector becomes too high or sound of the Duct Fan becomes loud.
Note:
TP1961, TP1907: MAIN C.B.A.
PDF created with pdfFactory Pro trial version
Fig. 5-4-19
60
www.pdffactory.com
Advertisement
Table of Contents
