Table of Contents
Advertisement
5.4.4. WHITE BALANCE ADJUSTMENT
Purpose:
To set the standard white level for each color temperature.
Symptom of Misadjustment:
White will become bluish or reddish.
This adjustment should be done in a darkroom.
Note:
This adjustment should be done in a darkroom.
1. Supply Gray Scale Pattern Signal (10 scales) and Project on the
screen.
2. Press
or"CUTOFF B".
3. Press
the area around 3rdand 4th scale (A) becomes pure gray with no
red or blue tint.
4. Press
or"DRIVE B".
5. Press
area around 7th and8th scale (B) becomes pure gray with no red
or blue tint.
6. Repeat step 2 through 5 so that all the scales become pure gray
with no red or blue tint.
PDF created with pdfFactory Pro trial version
or
button on remote control to select"CUTOFF R"
or
button to adjust"CUTOFF R" or"CUTOFF B" so that
or
button on remote control to select"DRIVE R"
or
button to adjust"DRIVE R" or"DRIVE B" so that the
www.pdffactory.com
Fig. 5-4-8
48
Advertisement
Table of Contents
