Table of Contents
Advertisement
3. When any adjustments 5.4.1. through 5.4.4., 5.4.11. and 5.4.12. are
necessary, please refer to"Preparation for Adjustments 5.4.1.
through 5.4.4., 5.4.11. and 5.4.12.".
4. When any adjustments 5.4.13 through 16 are necessary, please
refer to"Preparation for Adjustments 5.4.13. through 5.4.16.".
5.1.1. The Factory Adjust Mode
All Electrical Adjustments are performed on the Factory Adjust Mode which is used remote
control unit instead of variable resistor to control the adjustment value.
1. Connect a jumper wire between TP6014 and TP6015 on Main
C.B.A. for over 5 seconds to enter the Factory Adjust Mode.
2. Press the remote control
to set the item to be adjusted.
Note:
Do not adjust all items in"Digital Adjust", and NRS-
H, GAMMA R, G and B in"Lcd/Fan Adjust, and
DVCO, TINT and COLOR in"Video/Rgb Adjust".
PDF created with pdfFactory Pro trial version
or
to select and press
Fig. 5-1-1
Fig. 5-1-2
Fig. 5-1-3
41
www.pdffactory.com
or
button
Advertisement
Table of Contents
