Table of Contents
Advertisement
Assembly Note:
1. After replacing the Polarizer Unit, adjustment is necessary (Refer
to 5.1. Initial Guide Line).
2. Make sure of the Mark color to distinguish the Polarizer Unit (Red,
Green, Blue) as shown in Fig. 4-4-2.
4.4.2. Removal of the Optical Base Unit and Optical Block Unit
1. Remove 4 screws (B) as shown in Fig. 4-4-3.
2. Lift the Optical Block Unit up to release 4 projections.
PDF created with pdfFactory Pro trial version
Fig. 4-4-2
Fig. 4-4-3
28
www.pdffactory.com
Advertisement
Table of Contents
