Table of Contents
Advertisement
Changing the input signal
(LCD Projector)
(Remote Control
unit)
or
R
G
B
1
R
G
B
2
Y
P
P
B
R
V
I
D
E
O
S
-
V
I
D
E
O
Note
• To turn off the input signal on-screen display, please see "Turning off the input signal display" on page 34.
• There is only one audio system circuit provided for the VIDEO AUDIO IN terminals for S-VIDEO and VIDEO signals.
Because of this, if using both S-VIDEO signals and VIDEO signals, it will be necessary to change over the connectors.
• There is only one audio system circuit provided for the AUDIO IN terminals for RGB1, RGB2 and YP
Because of this, if using both RGB signals and YP
• The LCD Projector is shipped from the factory with the system format selection function set to "AUTO." If the correct
picture is not projected when VIDEO signal is input and it is necessary to change the input to match the input signal,
refer to "S-VIDEO/VIDEO Signal Format Selection" on page 28.
• Please refer to page
39
• When RGB signal is input, please input the registered signals found on page 26.
Press the INPUT button
The input source for picture signals and the corresponding audio signals can
be changed by pressing the INPUT buttons on the Projector operating panel
or on the remote control.
The signal from the source which is connected to the RGB1 connector is
projected.
This terminal accepts input of RGB input signals from a personal computer
and DTV Format signals (RGB) from a DVD or a digital broadcast.
The signal from the source which is connected to the RGB2/YP
tor is projected.
This terminal accepts input of RGB input signals from a personal computer
and DTV Format signals (RGB, YP
monitor or Projector can automatically decide whether a Component signal is
the RGB-type or the YP
YP
P
B
R
The signal from the source which is connected to the VIDEO IN connector is
projected.
The signal from the source which is connected to the S-VIDEO IN connector
is projected.
to change the setting if you change the signal input to the RGB2/YP
P
-type. So, you will have to select either RGB or
B
R
manually.
P
signals, it will be necessary to change over the connectors.
B
R
P
) from a DVD or a digital broadcast. No
B
R
P
connector.
B
R
P
connec-
B
R
P
signals.
B
R
17
Advertisement
Table of Contents
