Table of Contents
Advertisement
4.4.3. Removal of the LCD Unit (RED/ GREEN/ BLUE)
- Removal of the LCD Green Unit
1. Remove 2 screws (C) and 2 washers (C) to remove the LCD
Green Unit as shown in Fig. 4-4-4.
- Removal of the LCD Red Unit
1. Remove 3 screws (D) and 3 washers (D) to remove the LCD Red
Unit as shown in Fig. 4-4-4.
- Removal of the LCD Blue Unit
1. Remove 3 screws (E) and 3 washers (E) to remove the LCD Blue
Unit as shown in Fig. 4-4-4.
Note:
1. After replacing the LCD Unit, adjustment is necessary (Refer to
5.1. Initial Guide Line).
2. Make sure that no dust gets on the surface of the LCD and the
Sapphire Polarizer. Clean those surface with a cotton swap
moistened with ethyl alcohol if necessary.
PDF created with pdfFactory Pro trial version
Fig. 4-4-4
29
www.pdffactory.com
Advertisement
Table of Contents
