4.4.4. Removal of the Projection Lens
1. Remove 4 screws (F) to remove the Projection Lens as shown in
Fig. 4-4-6.
Note:
Make sure that no dust gets on the Projection Lens. Clean the Projection Lens with cleaning
paper moistened with lens cleaner if necessary.
(Refer to 3.5. Cleaning the Projection Lens.)
Assembly Note:
When assembling the Projection Lens, attach the Focus Ring Knob so that it faces upward.
4.4.5. Removal of the Dichroic Prism Unit
1. 1. Remove 6 screws (G) to remove the Dichroic Prism Unit as
shown in Fig. 4-4-7.
PDF created with pdfFactory Pro trial version
Fig. 4-4-6
31
www.pdffactory.com