Table of Contents
Advertisement
4.2.7. Removal of the Lamp Fan-1
1. Remove a screw (J-1), a screw (J-2) and 2 screws (K) as shown in
Fig. 4-2-9.
Assembly Note:
Make sure that the Lamp Connector Cable is in the original position as shown in Fig. 4-2-9.
4.2.8. Removal of the Optical Block
1. Remove a screw (L) as shown in Fig. 4-2-10 and remove the Lamp
Air Duct.
2. Remove a screw (M) and 2 screws (N) as shown in Fig. 4-2-11 and
remove the Connector stay, the Lamp Connector and the Lamp
House.
PDF created with pdfFactory Pro trial version
Fig. 4-2-9
Fig. 4-2-10
24
www.pdffactory.com
Advertisement
Table of Contents
