Table of Contents
Advertisement
[ If you need to replace the lamp more urgently ]
- The LCD Projector has a forced cooling feature. After the
2. Grabbing the handle, place the LCD Projector up on its side as
illustrated.
3. Remove the Lamp cover screws.
First read caution and warning labels on Lamp cover. Then,
remove the Lamp cover screws (2), and take off the lamp cover.
4. Remove the Lamp unit screw.
Remove the lamp unit screw (2), then grasp the Lamp unit handle
and carefully pull it from the LCD Projector. Keep Lamp housing
opening to your right. Do not touch Lamp or point Lamp opening
at anyone.
PDF created with pdfFactory Pro trial version
POWER switch is turned OFF, and sometime during about the
first minute of the normal cooling fan operation, press
at same time. The cooling fan will change to high speed for
about 10 minutes. (The "C-d" STATUS CODE will be
displayed.)
Fig. 3-4-1
Fig. 3-4-2
10
www.pdffactory.com
and
Advertisement
Table of Contents
