Table of Contents
Advertisement
4.2.3. Removal of the Lamp Unit
1. Loosen 2 screws (E) as shown in Fig. 4-2-5.
2. Hold the handle of the Lamp Unit and carefully pull it out.
Caution:
Do not touch the Lamp House, Lamp Unit, etc. until they have
completely cooled off.
4.2.4. Removal of the Main C.B.A.
1. Remove 7 screws (F) as shown in Fig. 4-2-6.
2. Remove 2 screws (G).
3. Disconnect 11 connectors P1902, P1903, P1905, P1906, P4001,
P6001, P6002, P6004, P3501, P3502, P3503 on the Main C.B.A.
PDF created with pdfFactory Pro trial version
Fig. 4-2-5
Fig. 4-2-6
22
www.pdffactory.com
Advertisement
Table of Contents
