Table of Contents
Advertisement
2. Remove 4 screws (B) as shown in Fig. 4-2-2.
3. Hold the indent on the Air Filter Unit and pull the Air Filter Unit
out of the LCD projector.
4. Remove a screw (C).
5. Lift up the Top Cover Ass'y carefully rotating in the direction of
arrows shown in Fig. 4-2-3 and disconnect a connector P6005.
Caution
Be careful when lifting up the Top Cover Ass'y. A connector
P6005 may be damaged if you pull it strongly.
6. Carefully pull out the Top Cover Ass'y paying attention to 3 tabs.
4.2.2. Removal of the Lamp Cover Unit
1. Loosen 2 screws (D) as shown in Fig. 4-2-4.
PDF created with pdfFactory Pro trial version
Fig. 4-2-2
Fig. 4-2-3
Fig. 4-2-4
21
www.pdffactory.com
Advertisement
Table of Contents
