General Information; Identification Of The Machine And Main Components - Stiga e-PARK 220 Workshop Manual

WORKSHOP MANUAL
e-PARK 220
2 - INFORMATION FOR SERVICE CENTRES
Summary
2.1 GENERAL INFORMATION ......................................................................... 8
2.1.1 Identification of the machine and main components ............................... 8
2.1.2 Safety measures to be adopted .............................................................. 9
2.1.3 Basic equipment................................................................................... 10
2.1.4 Handling and lifting the machine .......................................................... 10
2.1.5 Tightening torque settings .................................................................... 11
2.2 SPARE PARTS .......................................................................................... 12
2.2.1 Non-original spare parts ....................................................................... 12
2.2.2 Characteristics of the original blades .................................................... 12
2.2.3 Characteristics of the original belts ....................................................... 13
2.3 SERVICING ............................................................................................... 14
2.3.1 Servicing program ................................................................................ 14
2.3.2 Test driving ........................................................................................... 14
2.4 CONTRTOL OF SAFETY DEVICES .......................................................... 15
2.4.1 Logic of intervention of the safety systems ........................................... 15
2.5 LUBRICATION ........................................................................................... 16
2.6 TECHNICAL SPECIFICATIONS AND DIMENSIONS ................................ 17
2.6.1 Technical specifications........................................................................ 17
2.6.2 Dimensions .......................................................................................... 17

2.1.1 Identification of the machine and main components

a) Machine
Each machine has a label (1) behind the seat which shows the techni-
cal specifications, the model and the serial number.
The model and serial number must be shown on each repair sheet
when requests are made under Warranty, and are indispensable for
spare part orders.
b) Transmission
The machine is equipped with a transmission unit powered by an inte-
grated electric motor. This component is supplied by an external manu-
facturer and is built to precise technical specifications that set it apart
from other similar products manufactured by the same manufacturer.
The serial number on the label (2) allows the product and its charac-
teristics to be correctly identified and must be always mentioned when
ordering spare parts or requesting information from the Manufacturer.
2 - INFORMATION FOR SERVICE CENTRES

2.1 GENERAL INFORMATION

CHAPTER EDITION PAGE
2018 8 /
84
1
2