Elements Of The Articulation; Replacing The Connecting Arm - Stiga e-PARK 220 Workshop Manual

WORKSHOP MANUAL
e-PARK 220
9. Unscrews the two rear screws (12),
10. Unscrew the four front screws (13),
11. Removed the lower part (14) of the footrest
(15) the whole footplate can be removed.
13
14
When assembling, perform the above steps backwards.

3.2.1 Replacing the connecting arm

1. Unscrew the front screw (1 - 17 mm wrench).
2. Unscrew the rear screw (2 - 17 mm wrench).
3. Replace the connecting arm (3) then reassem-
ble in reverse order, tightening the two screws
with a torque of 50 Nm.
IMPORTANT If you find it difficult to tighten the screw (1), lift the front frame to facilitate tightening.
3 - CHASSIS AND COVERS
13

3.2 ELEMENTS OF THE ARTICULATION

CHAPTER
2
EDITION PAGE
2018 23 /
84
12
15
14
1