Management Software; General Information - Stiga e-PARK 220 Workshop Manual

WORKSHOP MANUAL
e-PARK 220

9.3.1 General information

The machine's electronic management system includes five software packages, each of which is
dedicated to a specific command or control device:
● BMS (Battery Management System). Presides over the general functions concerning the
energy system and the rational use of energy availability by the AC-0 and ACE-0 control units.
● VMS (Vehicle Management System). Collects data from the control units and communicates
with the BMS. Contains the machine operating history (Black Box)
● AC-0. Manages the traction control unit and interacts with ACE-0 and BMS.
● ACE-0. Manages the control unit of the blade control and interacts with AC-0 and BMS.
● Display. Displays the operating functions and is the communication interface with the operator
or the Service Centre.
The software is physically resident in the single devices; in the event of replacement of one of the
above components, the corresponding software is already pre-loaded in the replacement compo-
nent,
The availability or necessity of any updates is communicated through the usual channels of infor-
mation in use with the Assistance Centres, indicating how to download from the Internet and the
relative instructions on how to load them on the relative equipment.
9 - ELECTRONIC MANAGEMENT - BATTERY

9.3 MANAGEMENT SOFTWARE

CHAPTER EDITION PAGE
2018 67 /
84