Removing And Replacing The Blades Motor - Stiga e-PARK 220 Workshop Manual

WORKSHOP MANUAL
e-PARK 220

6.1.3 Removing and replacing the blades motor

1. Remove the motor unit from the machine, fol-
lowing steps 1 to 18 of the "Removal of the
motor unit from the machine" procedure
6.1.2].
2. Remove the clutch from the plate as described
in the "Clutch disassembly" procedure
6.2.2].
3. Remove the motor (1) from the plate (2) by un-
screwing the four screws (3).
4. On the opposite side, unscrew the four screws
(4) and remove the upper plate (5).
When assembling, repeat the operations de-
scribed above backwards, taking extreme care
to:
– pass the cable harness (6) through the oval
hole in the upper plate (5) before attaching it to
the motor;
– tighten the four screws (3) with a click-type
torque wrench set to 25-30 Nm.
CHAPTER
6 - BLADES MOTOR - CLUTCH AND PTO
[
[
EDITION
2018
2 3
3
4
5
PAGE
38 /
84
1
5
6