Clutch And Pto (Power Take-Off); Replacement Of The Pto Belt - Stiga e-PARK 220 Workshop Manual

WORKSHOP MANUAL
e-PARK 220
NOTE The term "PTO" (Power Take-Off) is used to define the system for picking up and transmit-
ting motion from the motor to the control element of the cutting attachment.
The system includes an electromagnetic clutch fitted to the motor shaft of the blades and a trans-
mission belt that shifts the motion to an axle with pulleys.

6.2.1 Replacement of the PTO belt

1. Move forward the motor unit of the blades,
following steps 1 to 9 of the "Removal of the
motor unit from the machine"procedure .
6.1.2].
2. Make sure that the belt (1) is released
from the electromagnetic clutch pulley (2).
3. Turn the arm (3) of the tensioner towards the
centre of the machine so that the belt (1) is free
from the gallow pulley (4).
4. Once the belt (1) is completely loosened, it
can be removed from the upper pulley (5) of
the deflection axis.
When mounting, reverse the operations de-
scribed above.
6 - BLADES MOTOR - CLUTCH AND PTO

6.2 CLUTCH AND PTO (Power Take-Off)

CHAPTER
[
2
1
EDITION
2018
1
1 3
5
PAGE
39 /
84
12
4