Wheels And Tyres; Disassembling The Front Wheels; Disassembling The Rear Wheels; Tyres - Stiga e-PARK 220 Workshop Manual

WORKSHOP MANUAL
e-PARK 220

5.2.1 Disassembling the front wheels

1. Lift the front part and stabilize the machine
2.1.4].
2. Pull out the cotter pin (1) and remove the
washer (2) and the tool holder (3).
3. Pull out the cotter pin (4) and remove the inner
washer (5).
4. Remove the wheel.
IMPORTANT Always replace broken pins or pins
with deformations that may compromise their
function.

5.2.2 Disassembling the rear wheels

1. Lift the rear part and stabilize the machine
2.1.4].
2. Using a screwdriver, remove the snap ring (1)
and the washer (2).
3. Remove the wheel.

5.2.3 Tyres

The tyres used are «Tubeless» type and so any repair following a puncture must be done by a tyre
specialist according to the methods used for this type of tyre.
WARNING!
5 - TRANSMISSION UNIT - WHEELS

5.2 WHEELS AND TYRES

Always replace deformed rims as they could impair the hold of the tyre.
CHAPTER
[
[
EDITION PAGE
2018 34 /
84
1
3
2
5
4
1
2