Chassis And Covers; Removing The Carter Under The Seat - Stiga e-PARK 220 Workshop Manual

WORKSHOP MANUAL
e-PARK 220
5. Unscrew the two front screws (7),
6. Unscrew the two rear screws (8) and remove
the cover(9).
When assembling, perform the above steps
backwards.

3.1.2 Removing the carter under the seat

1. Fold the seat forward (1) and engage the safe-
ty catch (2).
WARNING!
the seat from accidentally falling out while
working, which could result in hand inju-
ries.
5
4
6

3 - CHASSIS AND COVERS

The safety catch prevents
7 8
CHAPTER
7
1
2. Disconnect all control connectors from the
lower part of the housing (3):
– on the right side, activation key (4), cruise
control (5) and emergency control (6);
– on the left side, blade engagement switch
(7) and height adjustment control of the
cutting deck (8).
EDITION PAGE
2018 19 /
84
9
9
8
3
2