Card State Debug Utilities - Nortel Call Recording Card User Manual

Test and Debug Capabilities

Card state debug utilities

Some debug facilities are available from the VxWorks shell, which you can
use to print out the state of certain global variables. A list of the available
debug commands is provided in Table 15: "VxWorks shell card state debug
utilities," on page 60.
Table 15:
Command
getAriesState
printAriesState x
printVpGlobs
printVpChannel x
swInfoGet
ifShow
inetStatShow
Ping "10.85.15.60",x
Use these commands to debug issues on the card at various levels.
60
VxWorks shell card state debug utilities
Description
Prints current state of all 32 M2616 (Aries) sets
Prints globals associated with M2616 (Aries) set x
Prints all VP globals
Prints globals associated with VP channel x
Prints the loadware, DSP and 8051XA firmware
versions
Prints the IP and Ethernet addresses
Prints the status of all network links
Pings IP address 10.85.15.60 x number of times.
Press Ctrl+C to stop to return to VxWorks shell.
Standard 1.0
Nortel Call Recording Card