Nortel Call Recording Card User Manual page 20

Installing the Nortel Call Recording Card
Step 6
Fully insert the card in the assigned slot and lock the latches. During
bootup, the HEX LED displays a visual progress indication of self
tests and information about the first failure detected. See "HEX
display codes," on page 54 for more information.
Step 7
The red LED on the faceplate of the Nortel Call Recording Card
remains illuminated until the unit is configured and enabled. If the red
LED is illuminated, an error occurred in one of the previous steps.
Step 8
Configure an Internet Protocol (IP) address for the card. See
"Assigning the Internet Protocol (IP) address," on page 40.
Step 9
Nortel Call Recording Card installation is complete.
20
Standard 1.0
Nortel Call Recording Card