September 2007
Step 1
Determine the cabinet, shelf, and slot location where you want to
install the Nortel Call Recording Card. See "Installation overview,"
on page 14 for card slot location.
Step 2
Configure the Nortel Call Recording Card virtual sets on the
Meridian 1/Sucession 1000 system. See "Switch Configuration for
Nortel Call Recording Card," on page 22.
Step 3
Connect cables. See "Cabling the Nortel Call Recording Card ," on
page 32.
Step 4
Unpack and inspect the circuit card.
ATTENTION!
Handle the circuit card using the guidelines specified in
"Precautions for handling circuit cards," on page 76.
Step 5
Ensure a security dongle is installed in the socket on the card. If not
currently installed, install a dongle in the socket. See Figure 4:
"Media card layout," on page 33 for the dongle socket location.
Planning, Installation, and Administration Guide
Installing the Nortel Call Recording Card
19