Nortel Call Recording Card User Manual page 71

September 2007
XA upgrade using FTP to transfer firmware to compact flash
card
Use this procedure to upgrade XA using FTP to transfer firmware to the
compact flash card.
1 Use the FTP application to copy the XA firmware onto the /C: drive using
the same method as outlined previously for transferring the application
load.
copy("/A:/filename","/C:/filename")
2 Reboot the card.
3 While the card reboots, when prompted, type jkl to access the bootROM.
4 Upgrade the XA firmware by typing the following from the shell:
upgradeXa "<server IP address>", "<userid>",
"<password>", "<path>", "<filename>" <CR>.
Where <Server IP Address> is the IP address of the Nortel Call
Recording Card. <userid> and <password> are the same as the shell
user name/ password on the Nortel Call Recording Card. <path> is the
location on the card where the XA firmware is located.
5 After the upgrade is complete, reboot the card.
Planning, Installation, and Administration Guide
Upgrade Procedures
71