Nortel Call Recording Card User Manual page 15

September 2007
LAN cabling
Software release
Dip switch setting
Time and date stamp
Upgrade capability
Recording storage
Conference capacity
Planning, Installation, and Administration Guide
Complete cabling requires:
One NTAG81 PC maintenance cable
50 pin I/O connector -A0852632
NTVQ83 ITG EMC shielding kit
One category 5, 100-base-T Ethernet standard
Meridian 1 Release 25.15 software or later. Succession
release 2.0 or later.
None.
Automatically sent out by M1 CPU.
Loadware upgrades performed from maintenance CLI.
Upgrade across network using FTP.
If using Call Recording, the FTP Server must have
adequate file storage space. For example, a one minute
call recording consumes up to 480 KB of disk space.
Each Nortel Call Recording Card session uses three
conference ports on the switch.
If OBTN is set to either AGENT or ALL, each Nortel
Call Recording Card session uses four conference ports
on the switch.
If using Agent Greeting and OBTN is set to either
AGENT or ALL, each Nortel Call Recording Card port
uses five conference ports on the switch.
Installing the Nortel Call Recording Card
15