Nortel Call Recording Card User Manual page 36

Configuring the Nortel Call Recording Card
Figure 6:
RS232 maintenance port
The RS232 maintenance port provides access to the Nortel Call Recording
Card command prompt for monitoring and maintenance purposes, such as
upgrades and debugging. This port is available at the 9-pin connector on the
Nortel Call Recording Card Adapter CLAN and also at the mini-DIN socket
on the faceplate of the Nortel Call Recording Card. The serial port settings
are 9600 baud, 8 data bits, 1 stop bit, no parity, and no flow control.
ATTENTION!
Access the maintenance port by one connection only (9-pin connector or
mini-DIN socket) at a time.
36
L-adapter and filter block connection setup on large systems
Standard 1.0
Nortel Call Recording Card