Device Detail Page - Nortel 2340 Configuration Manual

2
Filter the page to display only those devices that have a specific filter string in any of the columns. For
example, you can filter the list to include only those devices that have the string 'CLIENT' or 'ACCESS
POINT' in the Type column, or the string 'LOBBY' in the Locale column.
3
Reduce the scope of the list from 'All Devices' to 'Only Active Devices' or 'Only Inactive Devices'. An
active device is one which is powered on and has transmitted within the time specified by the Inactivity
Time parameter.
4
Select the
5
The default label used by the system to identify all devices on the Administrative Console is the MAC
address. To make it easier to identify devices on console pages and in reports, replace the default label
with one that is more descriptive, for example 'Lobby AP'.
6
Click Save.

Device Detail page

To display the Device Detail page for a device on the Device List page, select the
of information presented on the Device Detail page depends on whether the device is a Client or an Access Point.
The Current Status panel at the top of the Device Detail page presents a snapshot of the device's characteristics:
• label
• locale
• MAC address
• network info
• vendor
• RF fingerprint
• IP address
• channel
The tabs displayed at the bottom of the Device Detail present information that enables the System Administrator to
analyze how the device has been used since it entered the location. Regardless of the device type, the Activity tab and
Recent Locales tab always appears. If the device is an Access Point or a device in Ad Hoc mode, one additional tab
appears - the Associated Devices tab. For all other device types, the Network Info tab appears.
next to a device's label. The Device Information dialog for that device appears.
Nortel WLAN - Location Engine 2340 Configuration - Using Interfaces
Nortel WLAN Location Engine 2340 Web GUI 43
next to the device's label. The type