Page 1
Nortel WLAN — Location Engine 2340 Installation *324121-A* Part No. NN47250-306 (324121-A) October 2007 4655 Great America Parkway Santa Clara, CA 95054...
In the interest of improving internal design, operational function, and/or reliability, Nortel Networks reserves the right to make changes to the products described in this document without notice. Nortel Networks does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.
Nortel WLAN - Location Engine 2340 Configuration Interfaces: This document provides instructions for configuring and operating a WLE2340. • Nortel WLAN - Location Engine 2340 Command Line Reference: This document provides instructions for intial configuration via WLE2340 using command line interface. Installation •...
High voltage. This situation or condition can cause injury due to electric shock. Note. This information is of special interest. Text and syntax conventions Nortel manuals use the following text and syntax conventions: Convention Monospace text Bold text Italic text Menu Name >...
Safety Information Warning! Although you may be using this guide or another resource as a reference, before working with your WLE server product, pay close attention to these safety instructions. You must adhere to the assembly instructions in this guide to ensure and maintain compliance with existing product certifications and approvals.
AC power supplies Mains AC power disconnect: The AC power cord(s) is considered the mains disconnect for the WLE 2340 and must be readily accessible when installed. If the individual server power cord(s) will not be readily accessible for disconnection then you are responsible for installing an AC power disconnect for the entire rack unit.
Temperature and Ventilation Caution! Temperature: The temperature, in which the server operates when installed in an equipment rack, must not go below 5° C (41° F) or rise above 35° C (95° F). Extreme fluctuations in temperature can cause a variety of problems in your server. Caution! Ventilation: The equipment rack must provide sufficient airflow to the front of the server to maintain proper cooling.
Page 13
• Provided with a properly grounded wall outlet. • Provided with sufficient space to access the power supply cord(s), because they serve as the product’s main power disconnect. Nortel WLAN — Location Engine 2340 Installation...
Wichtige Sicherheitshinweise Lesen Sie zunächst sämtliche Warn- und Sicherheitshinweise in diesem Dokument, bevor Sie eine der Anweisungen ausführen. Benutzer können am Netzgerät dieses Produkts keine Reparaturen vornehmen. Das Produkt enthält möglicherweise mehrere Netzgeräte. Wartungsarbeiten müssen von qualifizierten Technikern ausgeführt werden. Versuchen Sie nicht, das mitgelieferte Netzkabel zu ändern oder zu verwenden, wenn es sich nicht genau um den erforderlichen Typ handelt.
Überprüfen Sie alle Kabel, Zusatzkarten und andere Komponenten auf Bringen Sie die Abdeckungen wieder am Gehäuse an, indem Sie die zuvor Bringen Sie die Verschlußeinrichtung (Padlock) wieder an und schließen Sie Schließen Sie alle externen Kabel und den AC Stromanschlußstecker Ihres Nortel WLAN — Location Engine 2340 Installation...
Page 16
Le bloc d’alimentation de ce produit ne contient aucune pièce pouvant être réparée par l'utilisateur. Ce produit peut contenir plus d’un bloc d'alimentation. Veuillez contacter un technicien qualifié en cas de problème. Ne pas essayer d’utiliser ni modifier le câble d’alimentation CA fourni, s’il ne correspond pas exactement au type requis.
Nótese que el interruptor activado/desactivado en el panel frontal no desconecta la corriente alterna del sistema. Para desconectarla, deberá desenchufar todos los cables de corriente alterna de la pared o desconectar la fuente de alimentación. Nortel WLAN — Location Engine 2340 Installation...
Page 18
INSTRUCCIONES DE SEGURIDAD: Cuando extraiga la tapa del chasis para acceder al interior del sistema, siga las siguientes instrucciones: de corriente alterna. los puertos situados en la parte posterior del sistema. descarga electrostática (ESD). Puede hacerlo si utiliza una muñequera antiestática sujetada a la toma de tierra del chasis - o a cualquier tipo de superficie de metal sin pintar.
L’interruttore attivato/disattivato nel pannello anteriore non interrompe l’alimentazione in c.a. del sistema. Per interromperla, è necessario scollegare tutti i cavi di alimentazione in c.a. dalle prese a muro o dall’alimentazione di corrente. Nortel WLAN — Location Engine 2340 Installation...
Page 20
PASSI DI SICUREZZA: Qualora si rimuovano le coperture del telaio per accedere all’interno del sistema, seguire i seguenti passi: sistema. prese installate sul retro del sistema. (SES), portando un cinghia anti-statica da polso che è attaccata alla presa a terra del telaio del sistema - qualsiasi superficie non dipinta - .
Nortel WLAN 2340 Location Engine Features This chapter briefly describes the main features of the WLE2340. This chapter provides a diagram of the product, a list of the server features, and diagrams showing the location of important components and connections on the server system.
Page 23
• Serial port (RJ45) • 1 USB port Rear Access • Dual PS/2 ports for keyboard and • mouse • Serial port (RJ45) • 2 USB ports • 1 GCM 100Mb management port Nortel WLAN — Location Engine 2340 Installation...
WLE2340 Back Panel Figure 2. Item Description PS/2 mouse connector RJ45 serial port (COM2/Serial B) NIC port 3 NIC port 2 PCI add-in card bracket or filler panel (shown) Ground studs (used for systems with DC-input power supplies) Power supply #1 Power input (AC-input power supply shown) Figure 3.
Page 25
Optical drive (optional) or filler panel (as shown here) Hard drive bay 0 Hard drive fasteners Hard drive bay 1 USB port connector (port 2) Item Description Filler panel Hard Drive Bays USB port connector (port 2) Nortel WLAN — Location Engine 2340 Installation AF000815 AF000816...
Page 26
Item Description Ground strap attachment RJ45 serial port connector (Serial B/ COM2) Filler panel Front panel control switch and status LEDs Filler panel Figure 6. WLE2340 Control Panel Item Feature Front Panel Status LEDs Main power LED (green) System status (green/ amber) HDD activity/fault LED (green/amber/...
Page 27
Item Feature Description Front Panel Switches ID switch Toggles system ID LED NMI switch Asserts NMI to server board Reset switch Resets the system Power switch Toggles the system power Nortel WLAN — Location Engine 2340 Installation...
WLE2340 Ethernet Ports The WLE2340 provides four gigabit Ethernet ports to install external NICs. Copper and Fiber options are available. Additional Ethernet Functionality The WLE servers have four GbE NIC ports mounted on the baseboard that are accessible from the rear of the chassis. An additional set of four rear-accessible GbE NIC ports can be added to the WLE system by using a quad GbE NIC PCIe card with rear I/O panel access ports.
Removing the Front Bezel Remove the right-side screw to release the bezel. (“B”) Note. Hold the bezel in place while you loosen the screws. After both screws are loosened, the bezel will drop from the chassis. Nortel WLAN — Location Engine 2340 Installation...
30 Hardware Installation of WLAN Location Engine 2340 Remove the front bezel from the chassis. Removing the Front Bezel Figure 7. AF000875 Installing the Front Bezel While holding the front bezel in place, tighten the screws at the left and right edges of the bezel.
Page 31
Install the chassis in the rack using four rack screws (not provided in the rack mount kit). Note. You must provide the four screws that attach the server to the rack since the requirements for these screws vary depending on the specification of the rack manufacture. Nortel WLAN — Location Engine 2340 Installation...
Page 32
32 Hardware Installation of WLAN Location Engine 2340 Figure 9. Assembled Rack Mount NN47250-306 (324121-A Version 01.01)
Use the hardware supplied with your specific rack if it is different from the hardware supplied in this kit. Destination Destination Device Port Sensors UDP 37008 Appliance any, (*) Appliance TCP 443 Appliance TCP 8003 Nortel WLAN — Location Engine 2340 Installation Purpose Communication Communication HTTPS HTTPS chapter in this manual.
Note. For more information about the initial sign-in to WLE2340 Console port CLI, see he Nortel WLAN - Location Engine 2340 Command Line Interface. Logging to WLE2340 via Initial Administration GUI The WLE2340 Administration uses Web-based interfaces, that allows you to configure and maintain the WLE2340. To login, you can do the following: NN47250-306 (324121-A Version 01.01)
Page 35
Password Again - Re-enter the new password. To save the changes, click Change Password. Note. The Intial Administration GUI login is limited to access to the Administration. This login does not pertain to the Location Engine Web GUI. Nortel WLAN — Location Engine 2340 Installation...
Configuring the network To configure the network, you can do the following: Select the Configuration menu >Configure Networking. Enter the following information: • DNS Information • eth0 Configuration • eth1 Configuration • eth2 Configuration • eth3 Configuration DNS Information To enter the DNS information, do the following: Move the mouse over the DNS information.
Page 37
❥ To modify the DNS servers, use the Edit and Remove links. To Save the Changes, click OK. Configuring the WLE2340 Ethernet The Nortel WLAN LE has four Ethernet interfaces. The ethernet interfaces are listed as follows: • eth0 •...
Configuring the Time To configure the time, do the following: Select the Configuration menu>Configuration TIme. The Configuration Time window appears. Enter the following information: • Time zone - Select the time zone from the drop-down list. Set the time manually, or configure a Network Time Protocol (NTP) server to synchronize the current time.
Page 39
The WLE2340 Admin GUI (port 8003) • The WLE2340 Console (port 443). Note. Once you restart the WLE2340, Application of the new X.509 SSL certificate to the location engine console will become effective. Nortel WLAN — Location Engine 2340 Installation...
The Nortel WLAN Location Engine 2340 can take the snapshots, which are zipped files consisting of various logs and the system database. These files can be useful to either backup the system information or to diagnose any potential...
You can perform the following operation: • Shutdown - click this to shutdown the system. • Restart - click this to restart the system. • Schedule - click this to schedule the reboot time. Nortel WLAN — Location Engine 2340 Installation...
System Update For Nortel WLAN Location Engine 2340, that requires a System Update, do the following: Connect to the WLE2340 Administration GUI using the URL: https://<WLE2340_IP_Address>:8003 Select the File>System Update. The System Update wizard appears. System Updates are distributed in binary format.
Page 43
When the update has been applied you will be asked to Finalize Update by clicking on the specified option. To revert to the previous system state, select the Schedule Reboot link, discarding the update. Refer to the Nortel WLAN Location Engine 2340 Configuration Interfaces for complete configuration details. Nortel WLAN — Location Engine 2340 Installation...
Page 44
44 Software Installation of WLAN Location Engine 2340 NN47250-306 (324121-A Version 01.01)
Lithiumbatteri - Eksplosjonsfare. Ved utskifting benyttes kun batteri som anbefalt av apparatfabrikanten. Brukt batteri returneres apparatleverandøren. VARNING! Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens instruktion. Nortel WLAN — Location Engine 2340 Installation...
VAROITUS! Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan laitevalmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden mukaisesti. Installing or Replacing the Power Cord Note. If you will be placing your server in a rack, wait to install the power cord until after the server is in the rack.
It must also include ventilation sufficient to exhaust a maximum of 1200 BTU per hour for a fully loaded server system using the WLE 2340 It is important to note that this measurement is the maximum, and aminimum or typical system could be much less.
Problems that occur at initial system startup are usually caused by an incorrect installation or configuration. Hardware failure is a less frequent cause. If the problem you are experiencing is with a specific software application, see “Problems with newly installed WLE2340 NN47250-306 (324121-A Version 01.01)
Set its brightness and contrast controls to at least two thirds of their maximum ranges (see the documentation supplied with your video display monitor). Turn on the system. If the power LED does not light, see Section “Power light does not Nortel WLAN — Location Engine 2340 Installation light”.
Verifying Proper Operation of Key System Lights As POST determines the system configuration, it tests for the presence of each mass storage device installed in the system. As each device is checked, its activity light should turn on briefly. Check for the following: •...
If the system cooling fans are not operating properly, it is an indication of possible system component failure. Check the following: • Is the power-on light lit? If not, see, • Are any other front panel LEDs lit? “Power light does not light”. Nortel WLAN — Location Engine 2340 Installation...
Make sure the hub port is configured for the same duplex mode as the network controller. • Make sure the correct networking software is installed. • If you are directly connecting two servers (without a hub), you will need a crossover cable.
Problems with newly installed WLE2340 software Problems that occur when you run new WLE2340 software are usually related to the software, not the server hardware. Faulty equipment is unlikely, especially if other software runs correctly. Check the following: • Make sure the system meets the minimum hardware requirements for the software. See the software documentation.
Amber (DS4J1) Control Panel Green Notes Press ID LED button or user Server Management software to turn on the LED. Green = No Fault Green blinking = dedated Amber = critical error or non-recoverable Amber blinking = non-critical error Blinking = Activity.
Error in the keyboard connection. Make sure keyboard is connected properly. Keyboard interface test failed. Memory size has decreased since the last boot. If no memory was removed, then memory may be bad. Nortel WLAN — Location Engine 2340 Installation...
Page 56
Table 8: BIOS Error Messages (Sheet 2 of 2) Error Message Memory Size Increased Memory Size Changed No Boot Device Available Off Board Parity Error On Board Parity Error Parity Error NVRAM / CMOS / PASSWORD cleared by Jumper <CTRL_N> Pressed NN47250-306 (324121-A Version 01.01) Explanation Memory size has increased since the last boot.
This product is marked with the following Product Certification Markings: Table 9: Table 10. Product Certification Markings Regulatory Country Compliance cULus Listing Marks USA/ Canada GS Mark Germany CE Mark Europe FCC Marking (Class EMC Marking (Class Canada Marking Nortel WLAN — Location Engine 2340 Installation...
Table 9: Table 10. Product Certification Markings VCCI Marking (Class Japan BSMI Certification Taiwan Number & Class A Warning GOST R Marking Russia RRL MIC Mark Korea China Compulsory China Certification Mark Electromagnetic Compatibility Notices FCC (USA) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interfer- ence that may cause undesired operation.
This is a Class A product based on the standard of the Voluntary Control Council for Interference (VCCI) from Informa- tion Technology Equipment. If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual. Nortel WLAN — Location Engine 2340 Installation...
Korean RRL Compliance English translation of the notice above: Type of Equipment (Model Name): On License and Product Name of Certification Recipient: Nortel Date of Manufacturer: Refer to date code on product Manufacturer/Nation: Intel Corporation/Refer to country of origin marked on product...
Page 64
Users must take full responsibility for their applications of any products specified in this document. The information in this document is proprietary to Nortel Net- works.